Geometric path planning without maneuvers for nonholonomic parallel orienting robots

Current geometric path planners for nonholonomic parallel orienting robots generate maneuvers consisting of a sequence of moves connected by zero-velocity points. The need for these maneuvers restrains the use of this kind of parallel robots to few applications. Based on a rather old result on linear time-varying systems, this letter shows that there are infinitely differentiable paths connecting two arbitrary points in SO(3) such that the instantaneous axis of rotation along the path rest on a fixed plane. This theoretical result leads to a practical path planner for nonholonomic parallel orienting robots that generates single-move maneuvers. To present this result, we start with a path planner based on three-move maneuvers, and then we proceed by progressively reducing the number of moves to one, thus providing a unified treatment with respect to previous geometric path planners.Peer ReviewedPostprint (author's final draft

Parallel robots with unconventional joints to achieve under-actuation and reconfigurability

The aim of the thesis is to define, analyze, and verify through simulations and practical implementations, parallel robots with unconventional joints that allow them to be under-actuated and/or reconfigurable. The new designs will be derived from the: * 6SPS robot (alternatively 6UPS or 6SPU, depending on the implementation) when considering the spatial case (i.e., robots with 3 degrees of freedom of rotation and 3 degrees of freedom of translation). * S-3SPS robot (alternatively S-3UPS or S-3SPU, depending on the implementation) when considering spherical robots (i.e., robots with 3 degrees of freedom of rotation). In both cases, we will see how, through certain geometric transformations, some of the standard joints can be replaced by lockable or non-holonomic joints. These substitutions permit reducing the number of legs (and hence the number of actuators needed to control the robot), without losing the robot's ability to bring its mobile platform to any position and orientation (in case of a spatial robot), or to any orientation (in case of a spherical robot), within its workspace. The expected benefit of these new designs is to obtain parallel robots with: * larger working spaces because the possibility of collisions between legs is reduced, and the number of joints (with their intrinsic range limitations) is also reduced; * lower weight because the number of actuators and joints is reduced; and * lower cost because the number of actuators and controllers is also reduced. The elimination of an actuator and the introduction of a motion constraint reduces in one the dimension of the space of allowed velocities attainable from a given configuration. As a result, it will be necessary, in general, to plan maneuvers to reach the desired configuration for the moving platform. Therefore, the obtained robots will only be suitable for applications where accuracy is required in the final position and a certain margin of error is acceptable in the generated trajectories.El objetivo de esta tesis es definir, analizar y verificar, mediante simulaciones e implementaciones prácticas, robots paralelos con articulaciones no-convencionales con el fin de incorporarles propiedades de sub-actuación y reconfigurabilidad. Los nuevos diseños se basaran en robots paralelos tipo: * 6SPS (alternativamente 6UPS o 6SPU, dependiendo de la implementación) para el caso de robot espacial (es decir, robots con 3 grados de libertad de rotación y de 3 grados de libertad de la traducción). * S-3SPS (alternativamente S-3UPS o S-3SPU, dependiendo de la implementación) para el caso de robot esférico (es decir, robots con 3 grados de libertad de rotación). En ambos casos, veremos cómo, a través de ciertas transformaciones geométricas, algunas de la articulaciones convencionales pueden ser sustituidas por articulaciones bloqueables o no holonómicos. Estas sustituciones permiten la reducción de la número de patas (y por tanto el número de actuadores necesarios para controlar el robot), sin perder la capacidad del robot para llevar su plataforma móvil a cualquier posición y orientación (en el caso de un robot espacial), o para cualquier orientación (en el caso de un robot esférico), dentro de su espacio de trabajo. El beneficio esperado de estos nuevos diseños es la obtención de robots paralelos con: * Espacios de trabajo mayores debido a que la posibilidad de colisiones entre las patas se reduce, y el número de articulaciones (con sus limitaciones intrínsecas de rango) también se reduce; * Menor peso debido a que el número de actuadores y de articulaciones se reduce; y * Un menor coste debido a que el número de actuadores y controladores también se reduce. La eliminación de un actuador y la introducción de una restricción de movimiento reduce, en uno, la dimensión del espacio de velocidades alcanzables para una configuración dada. Como resultado, será necesario, en general, planificar maniobras para llegar a la configuración deseada de la plataforma móvil. Por lo tanto, los robots obtenidos sólo serán adecuados para aplicaciones donde la precisión se requiera en la posición final y exista un cierto margen de error aceptable en las trayectorias generadasPostprint (published version

A bilinear formulation for the motion planning of non-holonomic parallel orienting platforms

This paper deals with the motion planning problem for parallel orienting platforms with one non-holonomic joint and two prismatic actuators which can maneuver to reach any three-degree-of-freedom pose of the moving platform. Since any system with two inputs and up to four generalized coordinates can always be transformed into chained form, this path planning problem can be solved using well-established procedures. Nevertheless, the use of these procedures requires a good understanding of Lie algebraic methods whose technicalities have proven a challenge to many practitioners who are not familiar with them. As an alternative, we show how by (a) properly locating the actuators, and (b) representing the platform orientation using Euler parameters, the studied path planning problem admits a closed-form solution whose derivation requires no other tools than ordinary linear algebra.Postprint (author’s final draft

Contact force transitions in regrasp tasks of planar objects

This paper presents a simple and fast solution to the problem of finding the time variations of the forces that keep the object equilibrium when a finger is removed from a three contact point grasp or a finger is added to a two contact point grasp, assuming the existence of an external perturbation force (that can be the object weight itself). The procedure returns force set points for the control system of a manipulator device in a regrasping action. The approach was implemented and a numerical example is included in the paper to illustrate how it works

A reconfigurable asymmetric 3-UPU parallel robot

© 20xx IEEE. Personal use of this material is permitted. Permission from IEEE must be obtained for all other uses, in any current or future media, including reprinting/republishing this material for advertising or promotional purposes, creating new collective works, for resale or redistribution to servers or lists, or reuse of any copyrighted component of this work in other works.Parallel robots with three UPU legs have received a lot of attention due to the possibility of assembling these legs so that the robot performs either a pure translational or a pure rotational motion. Nevertheless, some arrangements, despite their theoretical interest, are of doubtful practical utility due to their sensitivity to errors and the presence in their workspaces of mixed-modes that involve both translations and rotations. The introduction of some sort of asymmetry has been revealed of relevance to come up with more robust designs. In this context, we present an asymmetric 3-P robot, that can be reconfigured to work either as a translational or as a rotational robot by simply flipping upside down its moving platform.Peer ReviewedPostprint (author's final draft

Uncalibrated visual servo for unmanned aerial manipulation

© 20xx IEEE. Personal use of this material is permitted. Permission from IEEE must be obtained for all other uses, in any current or future media, including reprinting/republishing this material for advertising or promotional purposes, creating new collective works, for resale or redistribution to servers or lists, or reuse of any copyrighted component of this work in other works.This paper addresses the problem of autonomous servoing an unmanned redundant aerial manipulator using computer vision. The overactuation of the system is exploited by means of a hierarchical control law, which allows to prioritize several tasks during flight. We propose a safety-related primary task to avoid possible collisions. As a secondary task, we present an uncalibrated image-based visual servo strategy to drive the arm end-effector to a desired position and orientation by using a camera attached to it. In contrast to the previous visual servo approaches, a known value of camera focal length is not strictly required. To further improve flight behavior, we hierarchically add one task to reduce dynamic effects by vertically aligning the arm center of gravity to the multirotor gravitational vector, and another one that keeps the arm close to a desired configuration of high manipulability and avoiding arm joint limits. The performance of the hierarchical control law, with and without activation of each of the tasks, is shown in simulations and in real experiments confirming the viability of such prioritized control scheme for aerial manipulation.Peer ReviewedPostprint (author's final draft

Geometric path planning without maneuvers for nonholonomic parallel orienting robots

Current geometric path planners for nonholonomic parallel orienting robots generate maneuvers consisting of a sequence of moves connected by zero-velocity points. The need for these maneuvers restrains the use of this kind of parallel robots to few applications. Based on a rather old result on linear time-varying systems, this letter shows that there are infinitely differentiable paths connecting two arbitrary points in SO(3) such that the instantaneous axis of rotation along the path rest on a fixed plane. This theoretical result leads to a practical path planner for nonholonomic parallel orienting robots that generates single-move maneuvers. To present this result, we start with a path planner based on three-move maneuvers, and then we proceed by progressively reducing the number of moves to one, thus providing a unified treatment with respect to previous geometric path planners.Peer Reviewe

Generation of under-actuated parallel robots with non-holonomic joints and kinetostatic analysis of a case-study

It will be shown how to generate under-actuated manipulators by substituting non-holonomic spherical pairs (nS pairs) for (holonomic) spherical pairs (S pairs) in fully-parallel manipulators (FPMs). Through this pair substitution, an under-actuated manipulator, previously proposed by one of the authors, will be demonstrated to be generated from an inversion of the 6-3 FPM. Moreover, the kinetostatic analysis of this manipulator will be reconsidered to obtain a simple and compact formulation. This reformulated analysis can be used both in the design of the underactuated manipulator, and in its control

Generation of under-actuated parallel robots with non-holonomic joints and kinetostatic analysis of a case-study

It will be shown how to generate under-actuated manipulators by substituting non-holonomic spherical pairs (nS pairs) for (holonomic) spherical pairs (S pairs) in fully-parallel manipulators (FPMs). Through this pair substitution, an under-actuated manipulator, previously proposed by one of the authors, will be demonstrated to be generated from an inversion of the 6-3 FPM. Moreover, the kinetostatic analysis of this manipulator will be reconsidered to obtain a simple and compact formulation. This reformulated analysis can be used both in the design of the underactuated manipulator, and in its control.Postprint (published version

A one-motor full-mobility 6-PUS manipulator

This paper presents the feasibility study of an under-actuated parallel manipulator with 6-PUS topology, destined to handle work-tables in CNC machine tools. The proposed device exploits the fact that, in such an application, the path between the initial and final poses of the mobile platform is not assigned to reduce the number of actuators to only one